 |
6192 6193 |
5/8" x 50' 5/8" x 75' |
Gorlitz's uses Spectrum 10 Alloy chain. It is heat treated and permanently embossed with CG (Crosby Group and 10 Grade). The working load is 22,600, while the proof tested load is 45,200. Minimum ultimate load is four times the working load. |
 |
6158 6159 F 6055 |
Coupler Pin Spanner Wrench |
Gorlitz's heavy duty couplers and pins are manufactured from 4140 material and heat treated. The pins are threaded and require a spanner wrench for installation. |
 |
6070 6070A 6071 6071A |
5/8" x 75' 3/4" x 75' 5/8" x 150' 3/4" x 150' |
Gorlitz uses non-rotating python high performance wire rope provided with open end and closed end fittings. The 5/8" has a minimum breaking strength of 28.5 tons, while the 3/4" rope is 40.2 tons. |
 |
6160 6161 6162 |
6" 4" 3" |
Gorlitz's demolition heads are made from a single piece of machined hot roll steel. Three different sizes are available and each size has two slots to install blades. Shown with optional blades installed. |
 |
6170 6171 6172 |
6" 4" 3" |
Gorlitz's blades are manufactured from high quality tool steel and heat treated for maximum life expectancy while keeping a sharp edge. |
 |
6150 6150R |
Chain attachment Rope attachment |
Gorlitz's pull attachments are used for the 4" and 6" demolition heads. The attachments are considered the 'bridge' between the polyethylene pipe and the chain or wire rope. |
 |
6180 6181 6182 |
6" 4" 3" |
Gorlitz's polyethylene tube attachments are designed to match with our tube bushings. |
 |
6175 6176 6177 |
6" 4" 3" |
Gorlitz's aluminum tube bushings slide into the tube attachment. |
  |
6153 6153A 6154 |
5" Bolt 7" Bolt Washer |
Gorlitz's uses only the finest quality hardware. An extra heavy duty washer and Grade 8 machine bolt are used to fasten the tube bushing to the pull attachment. The 4" demolition head requires a 5" long bolt while the 6" demolition head accepts a 7" long bolt. |
   |
F 6050 F 6051 F 6052 |
Sliding T Extension Socket |
Gorlitz's sliding T handle, extension and socket is used to reach into the pipe to tighten the bolt. |
 |
6029A | Gorlitz's pressure gauge assembly comes complete with high pressure quick disconnect couplings, dust covers and a large easy to read dial. |
