Sewer and Drain Cleaning Knives and Blades tackle any Clogged Drain

Gorlitz's knives and blades are extremely strong and yet are flexible enough for any sewer or drain cleaning job! All Gorlitz knives are die cut and formed when in a soft condition and then heat-treated to our specification. In addition, they are black oxidized and oil dipped to prevent rusting. These hardy blades are offered in many different shapes and sizes depending on the drain or sewer cleaning job for which they are needed. Whether you need to cut roots, paper, diapers, napkins, grease, sludge, etc., our knives can even be hand sharpened for a special cutting job. Available with plain or serrated cutting edges, these blades are used with 3/8" up to 3/4" diameter cables to clean sewer lines from 1 1/2" up to 8" in diameter.

Gorlitz's blades K 01 thru K 05 with 1/4" mounting hole are for 3/8", 13/32" and 1/2" diameter cables. They are attached to cable ends E 01 thru E 03. Blade K 03A is made from extra thin material giving it greater flexibility.

Half Circle Plain
K 01	1/2" X 1 1/2"
K 02	1/2" X 2"

Full Circle Plain
K 03	1/2" X 1 1/2"
K 03A	1/2" X 1 1/2"
K 04	1/2" X 2"

Full Circle Plain
K 05	1/2" X 3"
K 05A	1/2" X 4"

Gorlitz's blades K 06 thru K 14 with 3/8" diameter mounting hole are made for 5/8", 11/16" and 3/4" diameter cables. They are used best with our E 20 chuck assembly, or any 3/8" diameter male threaded stud cable end.

Half Circle Plain
K 06	3/4" x 2"

Full Circle Plain
K 07	3/4" X 2"

Pear Shape Plain
K 08	3/4" X 3"
K 08A	3/4" X 4"

U-Shape Plain
K 09	3/4" X 4"

Full Circle Teeth
K 10	3/4" X 2 1/2"

Full Circle Teeth
K 11	3/4" X 3"

U-Shape Teeth
K 12	3/4" X 4"

Pear Shape Teeth
K 13	3/4" X 2"

Pear Shape Teeth
K 14	3/4" X 3"
K 14A	3/4" X 4"

Single Knife Teeth
K 19	3/4" X 4"
K 20	3/4" X 6"

Single Knife Coined
K 21	3/4" X 4"
K 22	3/4" X 6"

Single Knife Teeth
K 23	3/4" X 3"
K 24	3/4" X 4"
K 25	3/4" X 6"

Gorlitz's heavy duty 1" wide blades K 26 thru K 29 with 3/8" diameter mounting hole are made for 5/8", 11/16" and 3/4" diameter cables. They are used best with our E 21 chuck assembly, and our large blade holder E 62. Blade K 16A is an offset blade. One cutting side is 4” the other only 3” long.

Pear Shape Teeth
K 15	1" X 3"
K 16	1" X 4"

Grease Blades
K 17	1" X 3"
K 18	1" X 4"

Pear Shape Plain Offset
K 16A	1" X 4"

Pear Shape Teeth
K 26	1" X 3"
K 27	1" X 4"

Grease Blades
K 28	1" X 3"
K 29	1" X 4"

Sewer & Drain Cleaning Knives and Blades

The Drain Cleaning Equipment & Machine Specialist